LC application for John Deere 290G is not just word
Big arm force, digging force, power output – it`s all about the newest John Deere 290G LC crawler excavator.
Powerwise ™ III control system optimizes engine performance with hydraulic system. The excavator is managed by three modes:
John Deere 290G LC excavator general specs:
In standard the cab is equipped by HVAC system, factory seat cover, joystick, informative LCD-monitor. Steps are arranged in such a way that while stepping them shoes are cleaned from clumps of dirt. 360 views and soundproofed cab are nothing new.
The three-welded bulkheads in the boom, arm, and the main frame causes manufacturers not doubt to offer a 3-year or 10,000 operating hours guarantee on these items.
6.8-liter 6-cylinder John Deere PowerTech ™ PVX diesel engine is certified in accordance with IT4/Stage IIIB. Having regenerative restoration and particulate filter it can be easily removed from the top of the engine compartment (you can find meaning of the «PVX» abbreviation in the name of the engine here). The engine automatically switches to idle when having no load. PowerTech ™ PVX power is 188 hp at 2100 rpm. Optionally, you can set the engine with a smaller environmental standards:
The maximum speed of the excavator is 5.5 km/h. Tracked link with a triple grouser can have a width of shoe at only 800 mm. The arm can be up to 3.11 m and 3.75 m.
Excavator is equipped with an open hydraulic system with two main pumps that can work in both directions, and have a nominal flow of hydraulics at 236 l/min each.
Model can mount a variety of buckets with a capacity of 1.06 m3, 1.22 m3, 1.39 m3, 0.70 m3, 0.92 m3, 1.13 m3, 1.34 m3, 1.55 m3 and 3.0 m3.